Hi does anyone know how to change a main bean headlight on a 206 it says to take off the rubber seal which l have done then to release the metal clips which l cannot do does anyone have any help or can tell me how to release them thanks trish

l take it you mean the main beam headlight bulb.
1.take the plug off the back of the bulb
2.remove rubber seal on back of the lamp
3.push the metal clip inwards and push to the right then it will spring loose.
4 remove bulb and replace with new bulb
5.do reverse to 3,2,1

Hi at the back of the bulb to hold it in place is a spring clip take of electrical conector on the bulb this gives access to the clip a U shaped clip press the open two ends together to release and pull back slightly should swing open, other end attached to unit pull bulb out replace in opposite order try not to touch the glass part of new bulb

My, GOD.you do not plan to actually drive a Peugeot after dark??