l have a Peugeot 206, the bonnet catch has broke, how do l open the bonnet?

push down as you get someone to pull the lever. you may need to bounce on top of it.

There are 2 ways to do this, first would be getting the car on a ramp and pulling the cable catch, this would not be very expensive if taken to a garage.

secondly, sacrificing your grill to get through that way.

gain Access to pull cable catch.. you have a inner and outer cable.. the outer one should not move.. the thinner inner one should... try to clamp mole grips or plyres on and pull.. it will help if you get a mate to push down on bonnet at same time.... reg tony

the catch is broke?
as-in the lever or the cable?
either way u need to pull the cable to open it its will be a thin wire inside a black casing much like a brake cable on a push bike l do not know the route it takes through the engine bay & unless u do first l would be wary of destroying the grill to find u still cant get at the cable. if possible try & look under the bonnet of another 206, a friends maybe, & try & trace the cable so u know the easiest method or reaching it.